BMW

Home » BMW
  • 2015 BMW X3

    BMW X3
    Mileage
    122,947
    Service Date
    9/23/2026
    Services Performed
    • ENGINE OIL FILTER HOUSING – Remove & Replace – xDrive28i
    • PARKING BRAKE – INSPECT – [Check function.] BRAKE SYSTEM- inspect SUSPENSION & CHASSIS COMPONENTS – inspect STEERING SYSTEM – inspect TIRES & WHEELS – inspect – [adjust tires inflation pressure] COOLING SYSTEM – inspect HOSES & BELTS – inspect WIPERS SYSTEM – inspect EXTERIOR LIGHTS – inspect FLUID LEVELS – inspect and top up AIR CLEANER/ELEMENT – inspect CABIN AIR FILTER – REPLACE – [After every 2nd Engine Oil Service: Ventilation micro filter: replace ventilation micro filter.] ENGINE OIL & FILTER – REPLACE CONDITION BASED SERVICE SYSTEM (CBS) – RESET ROAD TEST VEHICLE
    • BRAKE FLUID – REPLACE – [Change brake fluid every 24 months, or when specified by CBS.] CONDITION BASED SERVICE SYSTEM (CBS) – RESET – [Reset the CBS after every service.]
     
    ROSE H. gave our service a 5 star review on 9/24/2026
  • 2018 BMW 330i

    BMW 330i
    Mileage
    80,898
    Service Date
    7/6/2026
    Services Performed
    • Powertrain scanned and fault codes recorded. Cooling system pressure tested to revile external coolant leaks. Engine started and cooling system performance check indicated low circulation leading to overheat condition. Recommend water pump & thermostat assemblies replacement along with defective turbocharger coolant supply line change. Flush cooling system and pressure test again. Run engine and check cooling system for performance.
    • CYLINDER HEAD TEMPERATURE SENSOR Remove and replace ( due to engine coolant temperature fault code)
    • WATER PUMP & ENGINE COOLANT THERMOSTAT Remove & Replace – Mechanical, Impeller including coolant thermostat.
    • TURBOCHARGER COOLANT HOSE Remove & replace defective (leaking coolant as per inspection) turbo charger coolant hose.
    • RADIATOR COOLANT HOSE FLANGE. Remove and replace upper radiator hose, coolant vent to reservoir and coolant pipe fang (attached to engine block under intake manifold)
    • ENGINE OIL FILTER HOUSING ( leaking coolant while engine at rest ). Remove, inspect & Replace defective engine oil filter housing.
     
    JAHAN O. gave our service a 5 star review on 7/6/2026
  • 2015 BMW X3

    BMW X3
    Mileage
    120,963
    Service Date
    4/24/2026
    Services Performed
    • Powertrain scanned and all trouble codes recorded and Reset DME. Engine started and ECU re scanned and following Fault codes retrieved; 11A002 ( Fuel High Pressure too Low) 140401 ( misfire #4 cylinder & fuel injection cut out) 140201 ( cylinder #2 misfire) Spark plugs removed and all cylidres compression pressures checked to be within specs ( 180 psi average) Further diagnosis led to pin point Defective #4 cylinder Fuel Injector (Stuck in Open Position). Customer informed and performed remove and replace #4 fuel injector, install new spark plugs and air filter. Clear all fault codes and road test vehicle to run and complete emission monitors, verify and confirm successful repairs.
     
    ROSE H. gave our service a 5 star review on 4/27/2026
  • 2006 BMW 760i

    BMW 760i
    Mileage
    165,400
    Service Date
    2/25/2026
    Services Performed
    • Powertrain scanned post charging the battery. No apparent fault codes related to engine no start issue found. Further tear down and diagnosis reviled defective starter. Recommend new starter motor along with valve cover gaskets replacement due to leaking engine oil on to the starter motor assembly.
    • STARTER ASSEMBLY – Remove & Replace
    • THERMOSTAT &/OR OUTLET – Remove & Replace – w/Outlet Housing
    • VALVE COVER GASKET – Remove & Replace – Both
    • PREVIOUS INVOICE BALLANCE
     
    JAMES C. gave our service a 5 star review on 3/23/2026
  • 2006 BMW 530i

    BMW 530i
    Mileage
    180,797
    Service Date
    10/17/2025
    Services Performed
    • Powertrain scanned and fault code related to Car Access System (CAS) diagnosed. Further investigation discovered faulty engine negative cable Intelligent Battery Sensor (IBS). Defective parts removed and replace. Vehicle starting system normal operation restored.
     
    RICHARD S. gave our service a 5 star review on 10/17/2025
  • 2019 BMW 430i Gran Coupe

    BMW 430i Gran Coupe
    Mileage
    52,108
    Service Date
    1/7/2025
    Services Performed
    • Remove intake manifold to expose engine cooling system circuit in order to pin point coolant leakage source. Further investigation revealed defective upper radiator hose flange at right side of the engine. recommend replacing the flange with an upgraded part and corresponding hoses.
    • coolant reservoir bypass hose replacement and cooling system flush and fill.
     
    RYLIE S. gave our service a 5 star review on 1/7/2025